Touchscreen Problems In New Mexico: Touch One Candidate, Vote For The Other

from the whooooops dept

Just as a judge has decided that there couldn't possibly be any technical glitches on e-voting machines, reports are coming out of New Mexico that voters using e-voting machines tried to vote for one candidate and saw checkmark appear next to the other candidate. The whole thing sounds a bit suspicious. Voting officials blame (of course) "user error," suggesting they accidentally touched the screen in the wrong place. Ed Felten believes the machines are miscalibrated. Either one of these is quite scary. Even if the election officials are right, the fact that multiple people reported this problem suggests there's a real problem with these machines. If it is a calibration problem, that's even worse. The entire point of these machines is to let you vote accurately. The fact that they're making it into the voting booth miscalibrated to make clicking for one candidate really a vote for another suggests something is very, very wrong with the procedure required to set up and certify that these machines will safely and accurately record your vote.
Hide this

Thank you for reading this Techdirt post. With so many things competing for everyone’s attention these days, we really appreciate you giving us your time. We work hard every day to put quality content out there for our community.

Techdirt is one of the few remaining truly independent media outlets. We do not have a giant corporation behind us, and we rely heavily on our community to support us, in an age when advertisers are increasingly uninterested in sponsoring small, independent sites — especially a site like ours that is unwilling to pull punches in its reporting and analysis.

While other websites have resorted to paywalls, registration requirements, and increasingly annoying/intrusive advertising, we have always kept Techdirt open and available to anyone. But in order to continue doing so, we need your support. We offer a variety of ways for our readers to support us, from direct donations to special subscriptions and cool merchandise — and every little bit helps. Thank you.

–The Techdirt Team


Reader Comments

Subscribe: RSS

View by: Time | Thread


  1. identicon
    Rob Henderson, 26 Oct 2004 @ 10:38am

    Miscalibrated fingers?

    I manage a polling place that uses touch screen units. I have personal experience with the "I touched one voter and the other was selected issue". The main culprit? Long fingernails. Women with long nails (not meaning to be sexist here, I've just not experienced problems with long-nailed men) who are unused to touch screen units seem to want to touch the screen with the pad of their finger. Frequently, the tip of the fingernail touches first, on the candidate above the one they are targeting. A simple explanation, and the 'problem' goes away.

    link to this | view in thread ]

  2. icon
    Mike (profile), 26 Oct 2004 @ 10:40am

    Re: Miscalibrated fingers?

    You don't think that's still a problem? If that happens frequently, then the designers should have designed the system to avoid that. I'd believe the explanation you're saying, but it's still problematic that it happens. Instead of blaming the person (or their fingernails) why not design a system knowing that this is an issue?

    link to this | view in thread ]

  3. identicon
    StuckWithADish, 26 Oct 2004 @ 10:56am

    Re: Miscalibrated fingers?

    The obvious solution here would be to "stagger" the checkboxes so that one is never directly above another one.
    I would be very interested to know how evenly distributed the errors are, i.e. what % of voters "accidentally" choose a Republican versus a Democrat. My cynical nature suspects it is something like 95% Republican.

    link to this | view in thread ]

  4. identicon
    Beck, 26 Oct 2004 @ 11:39am

    Re: Miscalibrated fingers?

    They could fix this by providing a stylus to select the choices. It would work like the touch-screen debit card reader at Wal-Mart - you can use the stylus to input your debit card PIN, or you can just press the buttons with your fingers.

    link to this | view in thread ]

  5. identicon
    dorpus, 26 Oct 2004 @ 12:51pm

    Re: Miscalibrated fingers?

    Yeah, but then illiterate Mexicans will hold the stylus with their fist and punch a hole through the screen.

    link to this | view in thread ]

  6. identicon
    Anonymous Hero, 26 Oct 2004 @ 2:58pm

    Problem? What problem?

    Maybe this is the way they want them to work.

    link to this | view in thread ]

  7. identicon
    Silverjets, 26 Oct 2004 @ 3:53pm

    Re: Miscalibrated fingers?

    Ummm....why not just have a confirmation box pop-up that says, "You have selected candidate X. OK CANCEL" How hard would that be?

    link to this | view in thread ]

  8. identicon
    Rob Henderson, 27 Oct 2004 @ 9:51am

    Re: Miscalibrated fingers?

    When you select one choice, it gets a black X on an orange field next to it. If thet is not what you want, touch it again to deselect, and touch another choice. At the end of the ballot, after you have voted or bypassed every question, there is a summary screen that shows you all the races and your selections. The questions in which you did not make a selection are highlighted. Touching any question takes you back to that point in the ballot to allow you to alter your choice. Only once you have seen all the questions and the summary screen can you press the final "cast ballot" button.

    link to this | view in thread ]


Follow Techdirt
Essential Reading
Techdirt Deals
Report this ad  |  Hide Techdirt ads
Techdirt Insider Discord

The latest chatter on the Techdirt Insider Discord channel...

Loading...
Recent Stories

This site, like most other sites on the web, uses cookies. For more information, see our privacy policy. Got it
Close

Email This

This feature is only available to registered users. Register or sign in to use it.