Is Rapid Prototyping Poised To Rapidly Explode?

from the fast-and-cheap dept

Rapid prototyping has gotten lots of attention as it has advanced from simple 3D printing to instant manufacturing. These days it's almost getting to the point of rapid overhyping. We keep hearing about how mainstream use of the technology is on the horizon, and about new developments like prototyping medical treatments, but it still remains expensive and mostly limited to large-scale manufacturing operations. The latest advance, however, hopes to bring prototyping not only into the light of day, but also spread it around the world quickly and cheaply. An engineer in England says he's created a prototyping machine that can also replicate itself. Others have tried to provide cheap access to such machines, but this latest self-replicating twist could make that much more attainable -- perhaps generating new prototyping machines for as little as a few hundred dollars each. To speed its adoption, the machine's creator is also making his design freely available online. This formula could lead to exponential growth and ubiquitous adoption. If so, the potential impact seems pretty big, as even the poorest areas could quickly get inexpensive access to industrial capabilities. Let's just hope they don't get too enamored of oddly shaped tables.
Hide this

Thank you for reading this Techdirt post. With so many things competing for everyone’s attention these days, we really appreciate you giving us your time. We work hard every day to put quality content out there for our community.

Techdirt is one of the few remaining truly independent media outlets. We do not have a giant corporation behind us, and we rely heavily on our community to support us, in an age when advertisers are increasingly uninterested in sponsoring small, independent sites — especially a site like ours that is unwilling to pull punches in its reporting and analysis.

While other websites have resorted to paywalls, registration requirements, and increasingly annoying/intrusive advertising, we have always kept Techdirt open and available to anyone. But in order to continue doing so, we need your support. We offer a variety of ways for our readers to support us, from direct donations to special subscriptions and cool merchandise — and every little bit helps. Thank you.

–The Techdirt Team


Reader Comments

Subscribe: RSS

View by: Time | Thread


  1. identicon
    Anonymous of course, 2 Jun 2005 @ 7:23pm

    No Subject Given

    We've been hiring stereo laser lithography equipment for about 8 years now to produce prototypes for work. Expensive but very good. What's really cool is a bit newer (to me.) Four years ago we started using a 3-D "printer" that lays down layers of fine sand mixed with glue. You shove a solidworks model into it and presto! Not as durable as the laser litho parts but often good enough for touchy feely stuff. I forget the price tag on the sand printer but believe it was in the sub-$30K range.

    link to this | view in thread ]


Follow Techdirt
Essential Reading
Techdirt Deals
Report this ad  |  Hide Techdirt ads
Techdirt Insider Discord

The latest chatter on the Techdirt Insider Discord channel...

Loading...
Recent Stories

This site, like most other sites on the web, uses cookies. For more information, see our privacy policy. Got it
Close

Email This

This feature is only available to registered users. Register or sign in to use it.