DailyDirt: Semi-Automatic Jobs

from the urls-we-dig-up dept

Lots of jobs these days couldn't be done as efficiently or as well (or at all) without a little computer help. Computerized assistants (eg. Siri/Cortana/Alexa/GoogleNow) are even helping us with more and more everyday tasks. Increasingly skilled machines are able to perform jobs -- and may be destroying some tedious segments of the labor market. But it's not just manual labor that might be replaced by robots. Automation can help almost anyone become more productive in their work, and as the costs of machines come down with time, we might want to prepare for semi-automated jobs to become fully automated. After you've finished checking out those links, take a look at our Daily Deals for cool gadgets and other awesome stuff.
Hide this

Thank you for reading this Techdirt post. With so many things competing for everyone’s attention these days, we really appreciate you giving us your time. We work hard every day to put quality content out there for our community.

Techdirt is one of the few remaining truly independent media outlets. We do not have a giant corporation behind us, and we rely heavily on our community to support us, in an age when advertisers are increasingly uninterested in sponsoring small, independent sites — especially a site like ours that is unwilling to pull punches in its reporting and analysis.

While other websites have resorted to paywalls, registration requirements, and increasingly annoying/intrusive advertising, we have always kept Techdirt open and available to anyone. But in order to continue doing so, we need your support. We offer a variety of ways for our readers to support us, from direct donations to special subscriptions and cool merchandise — and every little bit helps. Thank you.

–The Techdirt Team

Filed Under: air traffic controller, artificial intelligence, automation, bricklayer, labor, robot, work


Reader Comments

Subscribe: RSS

View by: Time | Thread


  1. identicon
    Anonymous Coward, 17 Sep 2015 @ 8:25pm

    We only need to worry when robots can start building copies of themselves without any supervision.

    link to this | view in thread ]

  2. identicon
    Anonymous Coward, 17 Sep 2015 @ 8:25pm

    We only need to worry when robots can start building copies of themselves without any supervision.

    link to this | view in thread ]

  3. icon
    JoeCool (profile), 17 Sep 2015 @ 11:05pm

    They Took 'Er Jobs!

    link to this | view in thread ]

  4. identicon
    Andrew D. Todd, 18 Sep 2015 @ 5:27pm

    Brick Will Go The Way of Wood and Electric Wiring Before It.

    Brick (and masonry in general) is in the process of becoming a kind of "veneer-material," applied to concrete or wood-frame construction. If you live in a house constructed in the last thirty years or so, go around and look at the "wood" critically. Do the same for your furniture. Veneer used to mean that you took plywood and glued a thin slice (say, 1/16 in) of Walnut or Oak on top. More recently, they use particleboard, and they use an embossing printing press, similar to that used to print greeting cards or book covers, and they print on oak grain. Very well, in the near future, in a factory, "brickwork" will be printed onto a thin slab of concrete, maybe an inch thick, and four by eight feet wide. It will be just like wall paneling and sheet-rock. MIT's robot may be very clever, and all, but it will succumb to the inexorable logic of the printing press.

    Parenthetically, about 1950, there were some proposals, from places like MIT and Caltech, for robots to assemble the "connections-layers" of electronic circuits, but these were made irrelevant by the advent of the printed-circuit board. We take for granted that you can print copper traces on a piece of plastic, and cause it to function as both interconnect and mounting chassis, but in 1950, this was an unconventional idea. "The Best and the Brightest" were still fixated on finding a means to get a machine to position a physical wire. I think the MIT-Caltech mind is systematically blind to the "quick and dirty" solution.

    I have a desk which I bought, used, from my landlady in Oregon, in 1986, for thirty dollars, which included a couple of strong young men to carry it up to my apartment. I suppose the desk must have been manufactured about 1960 or thereabouts, because it really is made out of plywood. I was traveling light at the time. I had put nearly all of my books in storage, going off to graduate school as if to boot camp, and I rented a furnished apartment. The furniture included a bed, a kitchen table and chairs, a sofa and an easy-chair, and a side table, but it did not include a desk, a bookcase, or a typing chair. So I had to buy those separately. I bought some mail-order bookcases from J.C.Penny, plain particleboard, with dado slots, and didn't pretend to be anything better. I bought a used swivel chair from the local junk store, and got it home by wheeling it along the sidewalk for six blocks. At any rate, I have a sense of the ongoing decline of the workmanship of furniture. Newer stuff has glossier surfaces, but it is fundamentally cheaper, and more dishonest in its construction.

    link to this | view in thread ]

  5. identicon
    teka, 20 Sep 2015 @ 9:53am

    Re: Brick Will Go The Way of Wood and Electric Wiring Before It.

    Some commercial suppliers already supply brick "veneers" to skin stick&board construction but outside of north america brick and block construction is more common.

    link to this | view in thread ]


Follow Techdirt
Essential Reading
Techdirt Deals
Report this ad  |  Hide Techdirt ads
Techdirt Insider Discord

The latest chatter on the Techdirt Insider Discord channel...

Loading...
Recent Stories

This site, like most other sites on the web, uses cookies. For more information, see our privacy policy. Got it
Close

Email This

This feature is only available to registered users. Register or sign in to use it.