Be Your Own Souvenir

from the 3d-printing dept

We've been interested in the potential legal implications of 3D printing for a while, but that shouldn't blind us to the fact that some of the natural uses of 3D printing can be pretty cool as well. There's something really remarkable about this new project, from blablabLAB, posted on Notcot, about the idea of being your own souvenir. Rather than just getting a little plastic trinket from a souvenir stand, you can pose yourself however you want, get a 3D scan, and then a 3D printing of yourself. There's a photo below and then a pretty cool video of the process in action.

Image courtesy of Notcot

Hide this

Thank you for reading this Techdirt post. With so many things competing for everyone’s attention these days, we really appreciate you giving us your time. We work hard every day to put quality content out there for our community.

Techdirt is one of the few remaining truly independent media outlets. We do not have a giant corporation behind us, and we rely heavily on our community to support us, in an age when advertisers are increasingly uninterested in sponsoring small, independent sites — especially a site like ours that is unwilling to pull punches in its reporting and analysis.

While other websites have resorted to paywalls, registration requirements, and increasingly annoying/intrusive advertising, we have always kept Techdirt open and available to anyone. But in order to continue doing so, we need your support. We offer a variety of ways for our readers to support us, from direct donations to special subscriptions and cool merchandise — and every little bit helps. Thank you.

–The Techdirt Team

Filed Under: 3d printing, souvenir


Reader Comments

Subscribe: RSS

View by: Time | Thread


  1. identicon
    Anonymous Coward, 26 Apr 2011 @ 9:10pm

    I need to hurry up and run to the USPTO and get a patent on this idea before someone else does. You can't blame me, I'm only doing it to avoid getting sued in the future and to potentially counter sue anyone who does sue me for anything.

    link to this | view in thread ]

  2. identicon
    Anonymous Coward, 26 Apr 2011 @ 9:27pm

    This reminds me of those etchings within a block of glass you can get in touristy destinations. Spouse and I got ours at Madam Tussaud's Wax Museum in NYC for our 15th anniversary. It's a cool memento. I'd do this 3D printing thing too. Maybe for our 25th! :)

    link to this | view in thread ]

  3. icon
    cc (profile), 26 Apr 2011 @ 10:35pm

    It's using hacked Kinects for the scanning and an open source 3d printer for the printing. Pretty neat stuff.

    link to this | view in thread ]

  4. identicon
    Mechanical Engineer, 26 Apr 2011 @ 10:38pm

    While 3d printing has a number of good attributes, there are a few downsides to 3d printing.

    The ABS thread cartridges the printers use work out to costing about $5 per cubic inch of material or dissolvable support material.

    Also, 3d printers have a large difference in resolution between the x-y plane and the z axis, which causes the stepping artifact you can see in the pictures above.

    The mechanical properties of a 3d-printed part are often not very good because of the striated pattern caused by the rastering motion of the printer head. This means that parts can't take impacts, high stresses, or high rotational speeds. The material is also prone to material creep.

    The printer sometimes needs pause to allow a layer to cool or to clean the printing head before printing the next layer.

    3d printing is a good technology. It's very useful for visualization purposes, real-size part placeholders, and novelty applications like this souvenir gimmick. Unfortunately, 3d printing also has its limitations. It would be overstating the technology to believe it will be anywhere near the star trek style replicators that people envision it as, at least in the near future.

    link to this | view in thread ]

  5. identicon
    Pixelation, 26 Apr 2011 @ 10:41pm

    All well and fine but i hold the copyright to my image. This will obviously infringe. What a horrible tragedy when it comes to my rights.

    link to this | view in thread ]

  6. identicon
    R, 26 Apr 2011 @ 11:52pm

    This is eerily reminiscent of Cory Doctorow's Makers.

    link to this | view in thread ]

  7. identicon
    Alatar, 27 Apr 2011 @ 2:40am

    Maybe, to gain people's sympathy, the TSA could offer you a naked souvenir of yourself after each scan.

    link to this | view in thread ]

  8. icon
    tech84 (profile), 27 Apr 2011 @ 2:56am

    cool!

    Nice concept, but the souvenirs kinda looked like miniaturized terracotta army. lol

    link to this | view in thread ]

  9. icon
    Tom Landry (profile), 27 Apr 2011 @ 5:20am

    Re:

    One thing it most definitely has done is changed the industrial design field. Prototyping is now so much more flexible and economical due to this technology.

    link to this | view in thread ]

  10. identicon
    Ethan, 27 Apr 2011 @ 6:20am

    Re: Cheaper than you think

    The price you quote is true for professional-grade FFD (Fused Filament Deposition) 3D printers, but perhaps you don't recognize the printer in the article - it's a Bits from Bytes RapMan, a descendant of the original RepRap Darwin model. The 3mm ABS filament used by it and other ~$1000 3D printers costs about $10-$15/lb (around $0.50/cubic inch), and large parts are frequently only filled to 20%-30% inside of solid shells.

    As for the mechanical properties of printed parts, RepRap models Darwin and Mendel can print the majority of the non-threaded parts to make another Darwin or Mendel, and I'm not aware of any reports of mechanical failure of these printed printer parts. There's even a Mendel variant that can produce all the printed parts in one 8"x8" print run. It's true that FFD parts are not as strong as machining the same shape out of a solid block, but rarely does that present a problem; It's more of an aesthetic issue.

    To learn more about affordable 3D printing you can do at home, google for 'reprap' or 'makerbot', or look for a user group near you.

    link to this | view in thread ]

  11. identicon
    Rekrul, 27 Apr 2011 @ 6:39am

    So before they take the scan, they mummify the person in Saran Wrap? Kinky...

    link to this | view in thread ]

  12. identicon
    Anonymous Coward, 27 Apr 2011 @ 7:31am

    Re: Fusili Jerry!

    Or those uncooked pasta sculptures Kramer made on Seinfeld.

    I guess it's the color, reminds me of pasta...or I need lunch.

    link to this | view in thread ]

  13. identicon
    Anonymous Coward, 27 Apr 2011 @ 11:39am

    Re:

    ...good thing Kinect isn't a Sony product then.

    link to this | view in thread ]

  14. identicon
    SafeCycle.Net, 27 Apr 2011 @ 9:42pm

    Re: 3d printer cartridges

    I had this very same query to another 3d resourcing company (pokono?) It seems to me the process of "engineering" , and packaging the micro solids and the chemical & power requirements to do so could not be called remotely sustainable..

    link to this | view in thread ]

  15. icon
    chris (profile), 28 Apr 2011 @ 11:04am

    Re: Re: Cheaper than you think

    As for the mechanical properties of printed parts, RepRap models Darwin and Mendel can print the majority of the non-threaded parts to make another Darwin or Mendel, and I'm not aware of any reports of mechanical failure of these printed printer parts.

    the only reprap parts you can print are the joints. most of the structure is metal thread rod, and the actual work is done with micro-controllers, stepper motors, and stepper motor driver boards, all of which you can't print.

    you can read about our hackerspace's mendel adventure here:
    http://wiki.hive13.org/Mendel

    link to this | view in thread ]

  16. icon
    chris (profile), 28 Apr 2011 @ 11:34am

    Re:

    The ABS thread cartridges the printers use work out to costing about $5 per cubic inch of material or dissolvable support material.

    yeah, and intricate parts can also take several hours to print. oh, and with the desktop size of the makerbot or the mendel, you are limited to parts that are less than a cubic foot in size. also the ABS that repraps and makerbots use (it looks like weed eater cord) is about $10 per pound.

    but even a 12 hour wait for a tiny, goopy gear made from what is basically melted lego is vastly cheaper and easier than waiting for 1000 parts to be injection molded and shipped from china, especially if you aren't done prototyping.

    The mechanical properties of a 3d-printed part are often not very good because of the striated pattern caused by the rastering motion of the printer head. This means that parts can't take impacts, high stresses, or high rotational speeds. The material is also prone to material creep.

    also true, but the purpose of a 3'd printer isn't always to make production parts, but to make one-off prototypes.

    once your part is designed you can move up to a different (even slower, even more expensive) one-off prototyping process, like sand casting or CNC milling so you can make your part from aluminum or another metal, or laser cut it from a sheet of plastic, wood or metal.

    3d printing is just one part of the desktop rapid prototyping stack. desktop sized CNCs and desktop laser cutters are also out there.

    runs of a million widgets in a fully automated mega-factory will be always be cheaper on a per widget basis, but that's a very 20th century way to approach things.

    the future is really uncertain from a supply chain standpoint. fuel pricing and natural disasters mean that making millions of widgets in one place and shipping them all over the globe could be a risky and/or expensive proposition.

    look at how earthquakes in asia have affected the markets for electronics over the years.

    link to this | view in thread ]

  17. icon
    chris (profile), 28 Apr 2011 @ 11:48am

    Re: Re: 3d printer cartridges

    It seems to me the process of "engineering" , and packaging the micro solids and the chemical & power requirements to do so could not be called remotely sustainable..

    repraps don't use cartridges. they use loops of ABS filament and a gear to push it through a heated extruder called a thermister in a process similar to the frosting bags you use to decorate cakes.

    there are other material types in the works such as polylactic acid which comes from corn and is biodegradable:
    http://blog.makerbot.com/2010/01/09/bio-friendly-plastic-for-your-makerbot-polylacti c-acid/

    ponoko is more of a marketplace for 3d things, and a lot of those things are laser cut and not always 3d printed. my favorite ponoko design is the ponoko reprap:
    http://reprap.org/wiki/PonokoRepRap

    link to this | view in thread ]

  18. identicon
    Souvenir pernikahan, 17 Jan 2015 @ 11:07pm

    Souvenir pernikahan

    great.im so interested.i have read bout digital printing.but i like better manual art printing.

    link to this | view in thread ]


Follow Techdirt
Essential Reading
Techdirt Deals
Report this ad  |  Hide Techdirt ads
Techdirt Insider Discord

The latest chatter on the Techdirt Insider Discord channel...

Loading...
Recent Stories

This site, like most other sites on the web, uses cookies. For more information, see our privacy policy. Got it
Close

Email This

This feature is only available to registered users. Register or sign in to use it.