Was Burning The House Down Part Of The Free Installation Offer?

from the wow,-this-HD-stuff-sure-does-make-those-fire-engines-look-real dept

A Verizon installer apparently started a fire at a home in a Boston suburb earlier this week, when he was drilling on the outside of the house and hit an electrical main. Perhaps this story wouldn't be so notable if this sort of thing didn't happen with some frequency -- as it's not the first time this sort of thing has happened. Meanwhile, over at Broadband Reports, one of their users says a shoddy installation by Time Warner resulted in a chunk of their fence burning down. All things considered, though, perhaps these folks should just feel lucky that the techs didn't blow up their house and kill them.
Hide this

Thank you for reading this Techdirt post. With so many things competing for everyone’s attention these days, we really appreciate you giving us your time. We work hard every day to put quality content out there for our community.

Techdirt is one of the few remaining truly independent media outlets. We do not have a giant corporation behind us, and we rely heavily on our community to support us, in an age when advertisers are increasingly uninterested in sponsoring small, independent sites — especially a site like ours that is unwilling to pull punches in its reporting and analysis.

While other websites have resorted to paywalls, registration requirements, and increasingly annoying/intrusive advertising, we have always kept Techdirt open and available to anyone. But in order to continue doing so, we need your support. We offer a variety of ways for our readers to support us, from direct donations to special subscriptions and cool merchandise — and every little bit helps. Thank you.

–The Techdirt Team

Filed Under: cable, telco
Companies: comcast, time warner, verizon


Reader Comments

Subscribe: RSS

View by: Time | Thread


  • identicon
    Anonymous Coward, 10 Aug 2007 @ 5:12pm

    Was Burning The House Down Was???

    You have one too many 'was's.

    link to this | view in chronology ]

  • identicon
    icepick314, 10 Aug 2007 @ 5:15pm

    i hear the song "Burning Down the House" by Talking Heads in the background...

    link to this | view in chronology ]

  • identicon
    yo mamma, 10 Aug 2007 @ 5:20pm

    law suite anyone

    link to this | view in chronology ]

    • identicon
      Anonymous Coward, 10 Aug 2007 @ 6:24pm

      Re:

      ... Law suit moron, we're not staying in a hotel suite.

      link to this | view in chronology ]

      • identicon
        Dude, 11 Aug 2007 @ 6:02pm

        Re: Re:

        Well where do you think the lawyers stay?

        link to this | view in chronology ]

        • identicon
          Coaster, 12 Aug 2007 @ 6:37pm

          Re: Re: Re:

          by Dude on Aug 11th, 2007 @ 6:02pm
          Well where do you think the lawyers stay?


          In the law suite near the electrical Maine?



          Sorry, couldn't resist...must need resistors...oh no, sorry...

          link to this | view in chronology ]

  • identicon
    Anonymous Coward, 10 Aug 2007 @ 5:36pm

    was's ...you moron

    link to this | view in chronology ]

  • identicon
    Rob Miles, 10 Aug 2007 @ 6:31pm

    Did anybody bother reading the article?

    As it turns out, there wasn't any fire, the fire department was simply called as an SOP precautionary measure.

    Verizon sucks, but let's not make this any more sensational than it needs to be.

    link to this | view in chronology ]

  • identicon
    Anonymous Coward, 10 Aug 2007 @ 7:19pm

    I think the Dept caption makes this story really worth while to read.

    link to this | view in chronology ]

  • identicon
    cable guy, 10 Aug 2007 @ 11:59pm

    drilling blind

    i've seen it done before. yes it happens. you also have to ask, was the house to code? I have seen so many homes built with wires where they are not supposed to be.

    Just another article that helps people jump to conclusions, as they love to do.
    just like politics, make up your mind without the info.

    link to this | view in chronology ]

    • identicon
      GoblinJuice, 11 Aug 2007 @ 11:57am

      Re: drilling blind

      i've seen it done before. yes it happens. you also have to ask, was the house to code? I have seen so many homes built with wires where they are not supposed to be.


      Great point. Probably wasn't. Ugh. ;(

      link to this | view in chronology ]

    • identicon
      cable guy, 13 Aug 2007 @ 7:13am

      Re: drilling blind

      Thanks for your input. You are sooo right. I am not an electrician, but you make perfect sense to me.

      link to this | view in chronology ]

      • identicon
        little missy, 13 Aug 2007 @ 7:26am

        Re: Re: drilling blind

        I am sorry cable guy, Little missy was the one who wrote number 28. I did not know how to go back and erase it.

        link to this | view in chronology ]

  • identicon
    Anonymous Coward, 11 Aug 2007 @ 1:07am

    Tech..dirt..?

    link to this | view in chronology ]

  • identicon
    5280, 11 Aug 2007 @ 7:01am

    Though this was Carmel, ME

    Same thing happened two or three weeks ago in Carmel, Maine. Fortunately we were able to save everything the laundry room. Time Warner installer put his drill into the electrical Maine and set the house on fire.

    link to this | view in chronology ]

  • identicon
    Chris, 11 Aug 2007 @ 9:32am

    Big Buisness, Cheep Labor.

    A lot of the big cable companies will hire anyone with tools and a clean drivers record. They give very little formal training, and what training they do give is more focused on the completion of paperwork. As another poster stated, a lot of houses are not up to code. I can't even begin to think of how many installations I've done where it looks like a four year old was in charge of making sure the homes were up to spec. I've never set fire to a home, but some people will run extension cord after extension cord out of the same outlet in another room, and when I've gone to plug in a power supply for a router or modem, it trips the entire circuit. Once it even blew it out, cutting power to half of the home.

    There are many things that can lead to such an event happening. Apparently the technician just clipped a line, and called the fire department to ensure everything was OK. Last thing you need is an exposed hot wire terminating on itself embedded four inches deep in insullation.

    link to this | view in chronology ]

  • identicon
    AdminVoid, 11 Aug 2007 @ 2:40pm

    Ouch

    It makes me feel sorry for the customer...

    link to this | view in chronology ]

  • identicon
    cable guy, 11 Aug 2007 @ 8:18pm

    expect too much

    Don't forget how customers want to have everything installed where they say. It's not always the installer that decides where to put the outlet. Just remember, you want that free install and the cheapest product you can get, don't expect perfection. It drives me nuts the amount of people that think everything should be free.

    Oh well, not everyone can be intelligent. After going into people homes for 5 years, intelligence is NOT as common as one would hope.

    link to this | view in chronology ]

    • identicon
      43346, 12 Aug 2007 @ 7:04am

      Re: expect too much

      THEY MAKE METERS TO TEST FOR CURCUITS IN WALLS , BEEN DOING MAINTANCE FOR 30 YRS ,THESE PEOPLE YOU CALL NOT SO INTELLIGENT IS WHAT MAKE YOUR PAY CHECK SHOW UP

      link to this | view in chronology ]

  • identicon
    Another Cable Guy, 11 Aug 2007 @ 10:32pm

    The company I work for does not just hire anyone. People they do hire usually have a decent cable background, then ride out with a tech for a few months, and also go to school for a couple weeks.

    These type thing happen for many reasons, not to exclude the guy being in a hurry cause he had 5 other houses to go to before he could go home to his family. No one ever looks at it that way. Just blow up the fact that it happened so all the haters can complain, and say how bad so and so company is.

    I hate people.......

    link to this | view in chronology ]

  • identicon
    Lucretious, 12 Aug 2007 @ 8:14am

    I was a service tech at several CATV companies and none ever offered any training. Theres no licensing for installers as there are for electricians etc (not in New England anyhow). When getting hired, you just claimed you have experience, they ask you a few basic questions and your hired, end of story.

    link to this | view in chronology ]

  • identicon
    home theater junkie, 12 Aug 2007 @ 8:23am

    happened in St Louis

    last year a Charter Communications Subcontractor did burn down a brand new $2,500,000 home as the owners were moving in. He drilled into the Main electric panel from outside.
    House burned to the ground

    link to this | view in chronology ]

  • identicon
    BNLaneville, 12 Aug 2007 @ 8:24am

    Lack of Professionalism

    Although in some cases the blame might fall on the customer for insisting on the placement of lines and hookups, it ultimately falls on the installer and his company. I used to remodel historic homes, when I changed any wiring or added wiring, I always used a circuit tester. Aside from that wires behind walls are easy to locate with a wire wand. They can find buried lines and lines in the wall. The Installer should correct the customer if placement is not safe, and the company should stress this in orientation.
    BTW, it happens with all installers when they stat to rush; Comcast bought me a very nice new mailbox, after the installer crushed it with his van and he was going forward!

    link to this | view in chronology ]

  • identicon
    JMP, 12 Aug 2007 @ 1:26pm

    bad training = ka-booms good trianing = boom$

    I am a field supervisor for a small WISP (2500 customers) in west texas and it still amazes me when I see things about installers drilling holes through utilities. It took me all of 2 hours to train 6 employees what to look for before drilling holes in walls to avoid this. 9 times out of 10 all it takes is looking at both the inside and outside of the wall where you want to drill if you see a electrical box of any kind on either side pick a new location. In the 5 years I have been with this company I have seen an electrical line hit twice and both instances were caused by non-code wiring. The gas line with the ground rod can be tricky but the easiest solution for this is to ground on the side of the house not the front or back 95% of all gas lines go out the back or the front it is very rare to see it going out the side. The sad thing is this is all common sence and really shouldn't even require training.

    link to this | view in chronology ]

  • identicon
    Anonymous Coward, 12 Aug 2007 @ 5:24pm

    Yeah, this is a service-related vent....I had Bright House come out to upgrade us to digital phone service. After getting a call telling me that the installer was 'running late' and couldn't make it to my house until 10:00 p.m. (GET REAL!), I rescheduled for the next day. The installer arrived and rewired damn near everything in the house and of course, nothing worked afterward! After hours on the phone with tech support (gotta say, they were nice folks, just couldn't help me!), I had to have a tech come out the next day to fix the computer and connection(bless him!) and then later, have another installer come back out to rewire everything correctly for the phone service. I don't expect perfection, but I do expect that people who get paid to do a job should know what they are doing. If I performed my job like that, I would be fired on the spot.

    link to this | view in chronology ]

  • identicon
    Paul, 12 Aug 2007 @ 7:26pm

    a house with wires where they are not suposed to b

    What kind of comment is "was the house built to code? I have seen so many houses with wires where they are not suposed to be."

    You're suposed to know whats behind the place where you're drilling. These people installing these systems are not exactly experts.

    link to this | view in chronology ]

  • identicon
    Donald C. Huebner, 12 Aug 2007 @ 9:10pm

    Burning down the house -

    Enjoyed reading all the comments on this. With understanding of how people are, but most don't know no matter how good you are this kind of thing happens because the companies expect so much out of someone. I betcha this wasn't a newby with only one job to do for the day. Everyone can't see how this can makes sense for someone to do but I have been there with close calls. Never any mistake like that, but it could happen. Work in a hundred degree heat 90 + hours a week, with a hundred different supplies to keep track of and install with six homes to visit all wanting something special, and don't let me forget about people who want to tell you about thier day. Does your boss understand? I'll let you answer that. After tossing and turning night after night with six hours sleep just to keep up, the brain may actually convince you that power just isn't on the other side of where the customer wants an outlet. Regulate the hours guys spend on making other people money and see how many houses you get burned down. Hey, and don't forget to pay. Some guys actuall know what they are doing.

    link to this | view in chronology ]

  • identicon
    Jeff from NJ, 13 Aug 2007 @ 6:25am

    Verizon

    It's too bad this happened, but I know alot about how Verizon hires and trains its people, and it is very unfair to suggest they just hire anyone and don't care what happens. I know of no other company that spends as much time on safety and training for it's field techs than Verizon. Cable companies may be a different story, but don't assume that one bad episode means the whole company sucks.

    link to this | view in chronology ]

  • identicon
    Chuck Norris' Enemy (deceased), 13 Aug 2007 @ 8:32am

    Locates?

    If, and I said if, the tech guy called the locater then it would be the locater's fault for not properly marking the line. In all these instances, getting proper locates should avoid any disasters. So I wonder if he skipped that step. Then the worker is to blame.

    link to this | view in chronology ]

  • identicon
    Dmac, 13 Aug 2007 @ 12:55pm

    Wall Drilling

    It's not just an issue with cable installs. We had a central a/c unit installed, and the installer went through a 220VAC line (off at the time, thankfully. It's for inceiling radiant heat). Found out two months later.

    I suggested to the company owner that the cost of equipping every one of his trucks with one of those fiber optic inspection devices with the light on the end would be cheaper then a lawsuit.

    link to this | view in chronology ]


Follow Techdirt
Essential Reading
Techdirt Deals
Report this ad  |  Hide Techdirt ads
Techdirt Insider Discord

The latest chatter on the Techdirt Insider Discord channel...

Loading...
Recent Stories

This site, like most other sites on the web, uses cookies. For more information, see our privacy policy. Got it
Close

Email This

This feature is only available to registered users. Register or sign in to use it.