Just As Key 3D Printing Patents Get Closer To Expiring, Intellectual Ventures Patents 3D Printing DRM

from the good-luck-with-that dept

3D printing is on the verge of really going mainstream, in part because of improvements in the technology, but in large part because the key patents that have limited that advancement are getting close to expiring. Of course, as it takes off, though, expect a ton of people to try to "tax" the success with new patents of their own. And, of course, it comes as little surprise that Intellectual Ventures will be a player in that space. Though its first attempt might backfire... Technology Review has a story about Intellectual Ventures getting a new patent on DRM for 3D printing. You can see the patent (8,286,236) yourself. It's a pretty broad patent that seems to cover a broad array of "authorization" measures for manufacturing based on a data file.

We've talked in the past about how patents too often get granted for taking something known or common and basically saying "on the internet" on it. Perhaps the next wave of patents will be the same kinda thing, but "... with 3D printing." Of course, patenting DRM might actually have a good, if unintended, result: perhaps it will scare people and companies away from making the mistake of trying to DRM up 3D printing files, and leave the system much more open. Though, given the historical comparisons, that seems unlikely...
Hide this

Thank you for reading this Techdirt post. With so many things competing for everyone’s attention these days, we really appreciate you giving us your time. We work hard every day to put quality content out there for our community.

Techdirt is one of the few remaining truly independent media outlets. We do not have a giant corporation behind us, and we rely heavily on our community to support us, in an age when advertisers are increasingly uninterested in sponsoring small, independent sites — especially a site like ours that is unwilling to pull punches in its reporting and analysis.

While other websites have resorted to paywalls, registration requirements, and increasingly annoying/intrusive advertising, we have always kept Techdirt open and available to anyone. But in order to continue doing so, we need your support. We offer a variety of ways for our readers to support us, from direct donations to special subscriptions and cool merchandise — and every little bit helps. Thank you.

–The Techdirt Team

Filed Under: 3d printing, drm, patents
Companies: intellectual ventures


Reader Comments

Subscribe: RSS

View by: Time | Thread


  1. identicon
    Anonymous Coward, 12 Oct 2012 @ 6:34pm

    I cannot wait to download my first pair of shoes.

    link to this | view in thread ]

  2. icon
    Zos (profile), 12 Oct 2012 @ 7:10pm

    I can't wait to download a car.

    link to this | view in thread ]

  3. identicon
    Anonymous Coward, 12 Oct 2012 @ 7:29pm

    Re:

    An open-source environmentally safe car that is powered by compressed air.

    link to this | view in thread ]

  4. icon
    DH's Love Child (profile), 12 Oct 2012 @ 8:11pm

    Re:

    I'm holding out for a blow up doll.

    link to this | view in thread ]

  5. identicon
    DCL, 12 Oct 2012 @ 8:49pm

    Just wait...

    ... until they force the "always online" requirement for the DRM.

    I just printed some cool new jewelry... but i can't wear it to the party because there I don't get cell reception at that hotel.

    link to this | view in thread ]

  6. icon
    Killercool (profile), 12 Oct 2012 @ 9:00pm

    Re: Just wait...

    The new fad will be to attend the party while escaping the giant, invisible, immortal scorpion your bracelet turned into.

    link to this | view in thread ]

  7. identicon
    Anonymous Coward, 12 Oct 2012 @ 9:16pm

    "...the key patents that have limited that advancement..."

    And those patents, by patent number, are?

    link to this | view in thread ]

  8. identicon
    Anonymous Coward, 12 Oct 2012 @ 11:07pm

    Questions

    Other than Lego and the like, how many have patents on their designs. If you can't enforce your rights how can you enforce DRM? If a manufacturer produces a toy tractor and I copy it for my boy whose rights did I infringe? Will manufacturing patents that require totally different tooling apply to the finished products regardless of how it was finished?

    The original article notes that you can't copyright physical objects. Blueprints and drawings from a design are copyrightable as I understand it. And any object produced may infringe on the design itself. I just can't reproduce the rendering of the object.

    link to this | view in thread ]

  9. icon
    Hans B PUFAL (profile), 12 Oct 2012 @ 11:37pm

    Good news?

    Give the reputation of IV and the fact that they do not do product development perhaps this patent will keep the idea off the market.

    link to this | view in thread ]

  10. identicon
    Anonymous Coward, 12 Oct 2012 @ 11:39pm

    This has got to be the most hairbrained patent ever. Verifying digital rights on a file has absolutely nothing to do with what the file might be used for. DRM works the same way regardless of a file's name, extension, or intended use.

    This is a 57-part patent making 57 separate claims, each of which applies to binary files used in a wide variety of processes, "attaching, printing, painting, engraving and/or tattooing". I didn't even know there was such a thing as digital tattooing, but hey, it's now patented, in 57 different ways!

    link to this | view in thread ]

  11. icon
    The eejit (profile), 13 Oct 2012 @ 1:50am

    Re: Re: Just wait...

    Is that you, Harry Copperfield Blackstone Dresden?

    link to this | view in thread ]

  12. identicon
    Anonymous Coward, 13 Oct 2012 @ 1:55am

    obviousness

    nothing novel about a patent that requires you to pay....
    end of story someone needs force them into court on it.
    WHY? PRIOR art exists on other platforms.....and i'll bet they are using an existing DRM program or method that restricts access....if they do then its fraud too.

    link to this | view in thread ]

  13. icon
    Blatant Coward (profile), 13 Oct 2012 @ 3:37am

    BRB must go patent breaking DRM on 3D printing, because PIRATES!

    link to this | view in thread ]

  14. identicon
    Rekrul, 13 Oct 2012 @ 4:04am

    Re: Questions

    The original article notes that you can't copyright physical objects.

    Maybe not, but that won't stop corporations from using legal threats to stop the spread of 3D printing;

    http://www.techdirt.com/articles/20110630/03133214920/prop-wars-can-paramount-prevent-p eople-offering-up-plans-to-3d-print-movie-props.shtml

    link to this | view in thread ]

  15. identicon
    Anonymous Coward, 13 Oct 2012 @ 5:42am

    I can't wait to print a 3D printer. I'm that deep.

    link to this | view in thread ]

  16. identicon
    Anonymous Anonymous Coward, 13 Oct 2012 @ 8:24am

    Replicator Impairment

    Maybe not enough coffee yet, but I see these attacks on 3D printing as deprecation on our path to a replicator ala Star Trek (I never did quite understand why they couldn't just replicate whatever spare part they needed ("Cook me up a new core so we can eject the current one and it'll be like adding nitrous to a 21rst century street racer!")).

    Or will we see legacy players doing everything they can to prevent such development? What would manufacturing and food production look like in such a world, one with a replicator affordable enough that they are like hand held calculators available for $2.00 to us today.

    If we take manufacturing (I suppose someone will have to build replicators until that time when they build a replicator function into our replicators) and food production out of the workforce what will we do with our (by then) 10 billion inhabitants?

    Since there will be no 'work' left, everyone (not charged with maintaining replicators) will be in the entertainment business or making new designs to feed into the worlds replicators (micro-payments to the developer?).

    Given all that and other nightmare scenarios I am imagining, I still want my replicator...now!

    /end nightmare

    link to this | view in thread ]

  17. identicon
    Anonymous Coward, 13 Oct 2012 @ 9:32am

    Re: Replicator Impairment

    Well, you still need raw material. You can always recycle what you don't need or is broken and feed it to the replicator. Then you will still need to maintain other machinery that is not cost effective to replicate. I'm sure it will require energy to rearrange all that matter to useful material and produce something. I don't see the workforce drying up anytime soon. Someone has to visually inspect the road-layer to make sure it says on its apporved course. Besides, there will always be work at the post office, even if it only requires teleporting a package to Tau-Alpha 7.

    link to this | view in thread ]

  18. identicon
    Anonymous Coward, 13 Oct 2012 @ 10:37am

    Having scanned the patent it is a long winded attempt to patent any form of drm or production authorization used in conjunction with any computer controlled machine. It simply enumerates all the machine types and authorization techniques that IV could think off. It pads out with descriptions of the components of a work station, network architecture and other details that have nothing to do with its subject matter.
    It is a good example of how to say little with the maximum number of words. I suspect that reading it in detail broke the patent examiners brain, and that is why it was granted, he/she did not want to see it resubmitted with minor tweaks.

    link to this | view in thread ]

  19. identicon
    DS, 13 Oct 2012 @ 11:13am

    Re:

    I can't wait to copy that car.

    link to this | view in thread ]

  20. identicon
    Anonymous Coward, 13 Oct 2012 @ 12:47pm

    Imagine having the FBI Warning Screen emblazoned on every surface of whatever you printed out.

    link to this | view in thread ]

  21. identicon
    varagix, 13 Oct 2012 @ 1:36pm

    Re:

    Makerbot 3D printers can already print out some 70% of the materials needed to create more Makerbot 3D printers, so it's not that far away actually.

    link to this | view in thread ]

  22. identicon
    Anonymous Coward, 13 Oct 2012 @ 2:13pm

    Well in a twisted kind of way, this is actually a good thing. It means that most companies won't be able to put DRM's on their 3D models for printing anymore - unless of course they pay IV for the privilege. But hopefully it means most of them won't bother, and will leave them DRM-free.

    link to this | view in thread ]

  23. identicon
    Andrew D. Todd, 13 Oct 2012 @ 2:25pm

    Customization versus Intellectual Property.

    What custom manufacturing, in whatever form, is really useful for is to adapt to the fact that people come in different sizes and shapes.

    Looking at what I actually did in the last couple of weeks, I note that I had occasion to take a pair of great heavy boots in to the cobbler, for new soles and heels. Inclusive of taxicab fare, this came to something in excess of a hundred dollars. I had originally bought the boots for a hundred and sixty dollars, at the local Red Wing store, and these are of course boots of the plainest possible description, with no decorative tooling or anything like that. At the time of purchase, the cobbler had done about a hundred dollars worth of custom-tailoring, if one can apply that word to boot leather, that is, lengthening the shaft to knee height, inserting additional rubber in the insole to bring it up to the level of a running shoe, and inserting a corrective wedge in the heel, as my ankles have a tendency to bow outwards when walking on hillsides. These are things which the manufacturer could have done without any great difficulty, if it had been geared to talking with the customer, rather than selling a standard style and size on a "take-it-or-leave-it" basis, through a multi-tier dealer-distributor network. I suppose that plastic prototypes could have been used to facilitate fitting and custom manufacture. However, for the present, plastic is not a satisfactory substitute for leather.

    Before buying two pairs of boots, I went in and had a talk with the cobbler, saying, "since you are going to be repairing the things, how do you feel about Red Wing's current product? Have they been doing anything you don't approve of?" We both knew that a maker of premium boots is under temptation to "monetize" its reputation by covertly substituting plastic for leather, the way Frye's did, back around 1980. He assured me that Red Wing's reputation was still good, that they hadn't changed anything, and that the local Red Wing dealer (which is also the local military surplus store) was okay, and I went off to place an order for boots. I've been wearing the same general type of boots for the last forty years, and the same brand for the last twenty. Boots of a broadly similar type can be found in illustrations dating back to at least the 1630's, more than three hundred and fifty years ago. In this context, intellectual property simply doesn't mean much of anything. What matters is fit and workmanship.

    To Anonymous Coward, #17.

    The quality of the raw material matters. The term "shoddy" has an interesting history. It originally referred to a kind of recycled cotton waste. During the American Civil War (1861-65), contractors, intent on making a quick buck, spun and wove the shoddy up into cloth, dyed it Army Blue, and made it into uniforms. When worn by troops in the field, in the rain and the mud, the fabric tended to disintegrate. The Army remembers, of course, and is famously sticky about what it buys. Army surplus clothing is famous for being hard-wearing.


    There are of course horror stories, like the one in the Technology Review comments about the man whose $12,000 paper-cutting machine was crippled for want of a plastic knob, and the manufacturers of the machine merely saw that as an opportunity to exploit him financially, at the expense of their own long-term reputation.

    link to this | view in thread ]

  24. identicon
    Anonymous Coward, 14 Oct 2012 @ 3:47am

    Re: Re:

    Mine will be powered by political DERP. It's the one thingg the world will never have a shortage of.

    link to this | view in thread ]

  25. identicon
    Anonymous Coward, 14 Oct 2012 @ 6:17am

    Thanks for the update.

    link to this | view in thread ]

  26. icon
    nasch (profile), 14 Oct 2012 @ 12:42pm

    Re: Questions

    I assume the idea is to keep people from buying and then sharing the design files. Because DRM has worked so well for that in other areas.

    link to this | view in thread ]

  27. icon
    orbitalinsertion (profile), 14 Oct 2012 @ 7:11pm

    Re: 'digital tattoo'

    This is quite possibly a reference to the practice of adding a unique ID code of some sort to electronic machines. See motherboard tattoo and CODE PURPLE.

    This does things like ensure you use exactly the disc that came with a computer to reinstall an OS, or make the whole machine have fits if you just need to replace the HDD or add expansion cards.

    link to this | view in thread ]

  28. identicon
    JaseP, 15 Oct 2012 @ 10:09am

    Patent busting...

    There is, now, a way to get prior art in the hands of patent examiners, via the web,... So let's get to it folks,... find a bunch of prior art...

    Read up;
    http://meta.patents.stackexchange.com/questions/105/i-want-to-make-a-difference-how-can-i-submi t-prior-art-to-the-patent-office?cb=1

    link to this | view in thread ]

  29. icon
    David (profile), 15 Oct 2012 @ 11:00am

    Re: Good news?

    I was just thinking the same thing. With this patent, nobody'll DRM their stuff... Unless they feel like paying IV for the privilege...

    link to this | view in thread ]

  30. icon
    fb39ca4 (profile), 15 Oct 2012 @ 12:07pm

    Re: Re:

    Yes, most of the structural and mechanical components can be printed right now, but not stuff like motors, electronics, and heaters.

    link to this | view in thread ]

  31. identicon
    Oh THAT Brian, 7 Nov 2012 @ 8:52am

    Print a car ...

    Years ago, I threatened to buy a big crate of steel wool and knit a Volkswagen :-)

    link to this | view in thread ]

  32. identicon
    Mark, 28 Aug 2013 @ 1:41am

    Nice Try Buttheads....

    The patent claims invention of a concept that has been obliterated by defacto practice for decades.
    The ITEM being manufactured has a "key" identifier or data object within the digital file that corresponds/is verified by the manufacturing "machine" before production. Can you say code signing?

    GOOD FUCKING LUCK enforcing that one.


    Intellectual Ventures is a parasitic organization. They make money off of threats and lawsuit settlements.

    link to this | view in thread ]

  33. identicon
    Mr.Mohsin, 2 Feb 2016 @ 2:40am

    Leather Manufacturer Producer & Exporter.

    Khawaja Tanneries(Pvt)Ltd is specialized in producing excellent varieties in COW & BUFFALO and enjoying 1.5 Million production capacity per month in Square Feet.Through time, our business has gradually broadened towards the various countries world-wide such as China, India, Vietnam, Thailand, Russia, Indonesia, Malaysia, Japan, USA, South Korea, Taiwan, Italy, France, Spain, Poland, South Africa, Germany andcomplete many other countries around the world.We also have developed quality standardization and remarkable service level to ensure customer satisfactiona

    link to this | view in thread ]

  34. icon
    shapecrunch (profile), 8 Aug 2019 @ 3:28am

    Flat feet, plantar fasciitis, diabetes, are some common issues that cause pain in the feet. Sportsmen often face issues with feet pain.
    Custom insoles are the solution to feet pain, providing relief and comfort almost instantly.

    https://shapecrunch.com/foot-pain-remedies/

    link to this | view in thread ]


Follow Techdirt
Essential Reading
Techdirt Deals
Report this ad  |  Hide Techdirt ads
Techdirt Insider Discord

The latest chatter on the Techdirt Insider Discord channel...

Loading...
Recent Stories

This site, like most other sites on the web, uses cookies. For more information, see our privacy policy. Got it
Close

Email This

This feature is only available to registered users. Register or sign in to use it.